Just as piece plans should be a faithful representation of the miniature piece, it is important that the sample boards reflect the proper blend and balance of colors and materials in a pattern. When preparing a sample, try to place the samples according to their location in the room: for example, carpet at the bottom of the board, samples of walls and curtains near the top and samples provided in the middle.
It is also good to evaluate the size of the sample according to the size of the area that it will cover in the room: for example, your wallcovering sample should be much more Great as your cushion fabric sample.
The A2 format artist's mounting board (approximately 45 x 60 cm / ft 6 in x 2 ft) is an ideal base for your sample exhibition, although any neutral color panel of similar size can be replaced. Simply attach the samples to the board – double sided tape is the simplest method – and label each one with its purpose, "Curtain Fabric Flooring" and "Waterproofing". etc.
If this helps you visualize the finished part, include all the other elements that will be part of the diagram, such as ceiling fan illustrations, fixtures, and furniture. It is also a good idea to label each table with its room title, especially if you are decorating an entire house.
When your board is finished, you'll be surprised at how well it represents the finished pattern – the mix of colors, the number of contrasting textures and the variety of patterns that all work together. Any anomaly or imbalance should appear now. Maybe your schema is too dark or too bland. Maybe it has too few glossy surfaces or too many patterns. All of these and more will be demonstrated in your sample chart and can be corrected at this early inexpensive stage.
As a backup of your sample chart, or when there is not enough time to prepare a chart, there is another system of samples. registering a scheme that professionals use. It is called a diagram and is, in essence, a mini array of samples. This color reference system fits perfectly into a file and can be taken with you during your purchases. Unlike the panel of samples, it requires little talent and can be manufactured in no time.
The diagram sheet consists of a form, which can be easily built by hand or produced on a personal computer and which fits into a plastic file. This can then be filed in a letter size binder and transported where you want it. Simply fill in the title of the piece at the top of the page and add below in each surface you will represent by a sample.
In the center column write any information that you think is relevant to describe the finish or the material in question. In the last column, attach a small sample of the material described. In the case of a patterned material, select a section that shows as many colors as possible – a larger sample can still be kept in a clear plastic sleeve. And there you have it: a useful sample table in miniature.