Repairing garage doors can often be done by the owner himself. There are at least 5 simple things to check before calling a professional. Some repairs are extremely easy. For example, a rigid or squeaky door will surely require good cleaning and lubrication. Other repairs, such as repairing a torsion spring, are extremely dangerous and require the help of a professional.
Before proceeding with the repair, be sure to unplug your garage door opener so that you do not electrocute yourself while repairing your garage door. You will probably be standing on a ladder, which is a very bad place to electrocute yourself, as you may also fall off the ladder. Do not forget to wear safety glasses when working with power tools.
Here is a list of things to check before calling a professional to repair your garage door:
1. Check metal traces for damage
This tip Easy garage door repair can often solve the problem very quickly. Metal tracks can often have bumps or bumps. If you notice such damage, hit the damaged part of the track with a block of wood and a hammer to straighten the track.
2. Check Track Alignment
If the tracks are not properly aligned, the door may not work. It is not always necessary to unscrew the rails. you can simply try to loosen the bolts or screws and slowly tap the rails into position. Use a level to check the alignment of the tracks. The aligned rails will allow you to repair your garage door quickly.
3. Clean and Dry the Rails
Although it may seem obvious, hardened dirt and old lubricant can be the cause of bonding the garage door. In this case, repairing your garage door may involve cleaning the tracks and drying them out. You can use regular cleaners to clean the tracks.
4. Lubricate Tracks and Rollers
By simply lubricating the tracks and rollers, you can solve the problem and finish repairing the garage door in no time. For lubrication, you can use a lubricating spray or silicone spray. It is probably best to lubricate the tracks after cleaning them. In fact, any moving part will benefit from lubrication.
5. Tightening Loose Bolts and Screws
Bolts and screws tend to loosen over time. Try to check all the screws and bolts involved in the mechanism of opening / closing your door. Sometimes, the simple tightening can solve the whole problem. If you can not tighten the screws, because the holes themselves have become loose, you can use a "wood filler" or pieces of natural wood to fill the holes.
What not to do?
If you have tried each of the above solutions and none of them has worked, the problem may be the spring of the door. However, it is advisable not to perform the repair of your garage door if the problem seems to be spring, especially if it is a torsion spring. Unfortunately, there have been many cases where people have been injured or even killed by the springs of the garage door. One of the most common injuries is a shock to the head, resulting in severe traumatic brain injury.
If you have doubts about your garage repair, you should under no circumstances try it. In general, it will not cost too much. However, a professional will avoid injuries.