Home Faucet Repair Construction Plumbing

[ad_1]

When it comes to taking care of your home, there is nothing more annoying than a dripping faucet. Not only can this keep you awake all night, but it is also a waste of vital assets: water and money. A leaking faucet can increase your water bill very quickly.

Regular maintenance and faucet inspections are required in residential plumbing and construction plumbing for your faucets to work well. By using preventive maintenance and inspections, you can avoid having to phone a plumber to repair a leaking faucet.

Residential plumbing needs maintenance and inspections very often to avoid major malfunctions. If your home has low water pressure or just a simple leak or two, you can do the repairs and maintenance yourself. The two most common problems with a faulty faucet are loose nuts or a worn washer.

Many plumbing problems are simple and easy to repair, such as fixing a leaking handle by tightening loose connections. Remove the decorative coatings on the handle and find the nut at the bottom of the handle. Tighten the nut a little, but do not overtighten. Then check if the problem has been solved by turning the water on. If this is not the case, tighten the nut a little at a time until the leak is repaired.

Another common source of a leaky faucet is a tatty washer. Check the manufacturers' documentation first, as some newer faucets are rinseless, such as Moen single handle faucets. If this is your case, you can buy a simple repair kit in any hardware store. If not, you can change the washer yourself. All you need is a common key, a package of hardware washers and a screwdriver.

Repairing a shower or tub faucet may require a little extra effort since the valves are usually located behind the walls. Check an entrance door to the plumbing. If you can not locate an access door, you may need to create one yourself, or if you are not comfortable creating one, you should call one. professional plumber.

1. Shut off the water supply, which should be located under the sink (or behind an access door if you are in a tub or shower).

2. Inspect to see if to turn off the water by turning the tap to the on position.

3. Prevent evacuation by using a cloth to prevent things from falling into the sewers by putting a towel on it.

4. Remove any decorative handle to get the nut.

5. Use electrical tape or masking tape to dab the wrench to avoid scratching the faucet.

6. Loosen the gland nut in the handle with the wrench. Turn counterclockwise.

7. Turn the handle until you can remove the valve unit.

8. Remove the screw at the bottom of the valve. Find the washer.

9. Match the old washer with one of the new washer packs you have purchased. Make sure they are exactly the same size. If there is a different washer for hot and cold, be sure to use the washer properly designed for hot or cold water.

10. Install the new washer (s), replace the valve, return the handle to its correct position, and tighten the nuts.

11. Check for leaks by turning the water faucets under the sink to the on position and turning the faucet.

If you still have major problems or leaking plumbing, it is best to hire a professional plumber for faucet repair.

Repairing the faucet is not difficult with the proper tools and spares. Preventive maintenance, in addition to inspections, should help you prevent problems. Flowing and leaking faucets were purchased for immediate repair to avoid costly water costs and wasteful water resources.

[ad_2]

Source by Mark Plumber Bush

About the author

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.