How to clean a car battery


He comes so much to a car in his life. There will be cases where the best component will become worn or dirty due to years of driving. There could be cases where the oil has gotten dirty and has only been cleaned up or purged weeks later. Your car's battery can be cleaned in a workshop or in your own home.

Before starting work, the evidence must be assertive – make sure the car is off, unless you're a fan of getting burned with extremely hot electricity. You could also short circuits that could damage the electronics of your car.

  1. You will need to determine the configuration of the terminals because there are different types. Determining the configuration will help you choose the right key to loosen the nuts that hold the cables in place.
  2. Now you have to detach the cables (negative and positive respectively) from their messages. A twist might be needed to loosen the cable as they might have been squeezed hard enough.
  3. Before continuing the process, it is imperative to check for leaks or cracks. Car batteries lose acid and could corrode the rest of the engine components. If you notice any cracks or leaks, the battery needs to be replaced.
  4. Cables and collars may also have cracks along the wiring. They could easily be replaced by new parts.
  5. This is the part where a basic household item is needed to clean the battery: baking soda. The ratio for mixing baking soda and hot water in a small container is 1:17. It usually involves a tablespoon of baking soda and a cup of hot water.
  6. Then it's time to scour and clean. A toothbrush would be ideal for this process so that your hands do not come in contact with the battery.
  7. Dip the toothbrush into the mixture of baking soda and hot water, and rub the accumulation of corrosion. Usually, the clamps and cable poles contain the most accumulation and require the maximum cleaning.
  8. Once all the corrosion is extinguished, it is absolutely necessary to rinse off the baking soda and lose the corrosion with cold water. ] The battery must be completely dry before replacing the cables and clamps to avoid short-circuiting the system.

Make sure the entire car runs smoothly before making long journeys. This includes electrical components such as battery and mechanical components such as wheels, tires and engine parts.


Source by Mohammed Suliman

About the author

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.