You are probably sitting there thinking: what do all these terms mean? What's a desiccant dehumidifier? The world of water damage restoration can be quite confusing sometimes. Water damage specialists use a lot of complex and expensive tools and each tool has a purpose. This article will help you understand what these tools are and why the experts use them.
The desiccant dehumidifier is one of the most important tools used by water specialists. It is composed of four main components: the component that holds the desiccant material, a fan to move the air through the dryer (to dehumidify), a heater to heat the air that dries the desiccant, and a Another fan to move air is to dry the desiccant through the desiccant holder. When you have a flood, there is water and a desiccant dehumidifier gets rid of this water. A dehumidifier is used to remove water from cement floors, insulation, carpets, interior paints, drywall, basements and plaster. Say, for example, your sink is leaking and flooding the kitchen. Yes, you can pump all that water easily enough; However, any porous surface (wood, plasterboard, cement, insulation, carpet, etc.) that the water has touched has now absorbed this water and has been equipped with it. There is no way to completely get rid of this water damage unless using a dehumidifier.
An infrared hygrometer is another very important tool that allows specialists to assess the severity of the problem. An infrared hygrometer determines the moisture content in bulk solids by using infrared light. This is essential because often, repairing water damage is not as simple as repairing visible damage. You often have hidden complications that must also be taken care of.
Another essential tool is the ventilation system. Air motors (often called "carpet dryers" or "blowers") are designed to speed up the carpet drying process. They are placed incrementally around the carpet and lift the carpet from the ground up to where it rests on an air bed. They dry the carpet much faster than if you just let the carpet air dry. This is important to ensure the removal of water in a timely manner.
And last but not least, repair technicians can use a heavy roll (80-100 lb.). The roller is used to press the carpet and squeeze it by removing any remaining water after the pump. This process is done before the air carriers are used to dry the carpet as much as possible. This is a cruciferous step to have dry carpets because to dry the carpet with the air vents, the carpet must be almost dry so that it is not too heavy for the carpet to dry. air rises.
You now better understand what tools technicians use to remove water damage and how they work. Yes, it's very complicated, but specialists use this equipment every day; So you can sit back, relax and wait for the water damage to be repaired!